About

Hey, I’m Brian.

I’m an Electrical & Computer Engineering student at NYU Tandon (class of 2028) with a minor in Quantum Technology. I grew up on Long Island and I’ve been tinkering with stuff for as long as I can remember.

Right now most of my time goes to Rogue Aerospace, NYU’s hybrid rocket team. I handle radio and telemetry, which means I’m designing a custom PCB, simulating antennas, and building the circuit that remotely lights the igniter. On the side, I’m building a little RC car that’s controlled by a simulated fly brain, and a DIY digital camera with a grainy Y2K look, because I like how old digicam photos turn out.

I also run a small web design business for local companies, so if your business needs a site, come talk to me. When I’m not building websites, I take photos and videos, mostly events, portraits, and street photography. I’ve done IT support at NYU for almost two years too, which taught me how to explain tech without making people feel dumb.

Longer term, I want to use engineering to help rural communities in El Salvador, where my family is from. I’m still figuring out exactly what that looks like, but better internet access is where I’m starting. This past summer I went to Hanyang University in Korea to study sustainability, which got me thinking about this even more.

Brian standing by the water at night in a cream sweater, with a lit bridge and the city skyline behind him.
Education

NYU Tandon

B.S. Electrical and Computer Engineering, minor in Quantum Technology. Expected May 2028.

Dean’s List 2024–25. Study away at NYU Abu Dhabi, spring 2026.

Coursework: Signals and Systems, Digital Logic and State Machine Design, Computer Architecture, Advanced Circuits, Probability and Statistics, Linear Algebra and Differential Equations, Data Structures and Algorithms.

Experience

Where I’ve worked

  1. Jun 2025 – now

    Radio & Telemetry Systems Engineer

    Rogue Aerospace, NYU’s hybrid rocket team
    • Designing the radio and telemetry system for the team’s hybrid rocket, aimed at a real-time downlink beyond 10,000 ft AGL on the 915 MHz band within a ~2 W avionics power budget and ~18 dB link margin.
    • Rebuilt and bench-tested the XBee Pro radio links, bringing packet loss at 1 km from about 12% to about 1%, and got the team its first end-to-end real-time downlink.
    • Designing a custom avionics PCB in Altium, schematic through layout, to replace store-bought breakout modules for the 2026–27 build. Separately, designing the GSE control board.
    • Prototyping a wireless ignition circuit: two Arduino UNO R3 boards talk over the XBee link and gate a logic-level MOSFET that switches a 9 V igniter, so launch control no longer needs a hardwired arm/fire line.
    • Wrote a Python telemetry pipeline and C++ command/control firmware, logging about 20 packets per second across 8 ground tests. Integrated a SAM-M10Q GNSS module over UART at 10 Hz.
  2. Apr 2025 – now

    IT Support Assistant

    NYU Stern School of Business
    • Handle 5–10 faculty tickets a shift, closing about 90% on first contact, across 30+ classrooms and 60+ wireless mic channels.
    • Troubleshoot AV signal chains and a 25-printer fleet; recurring hardware failures are down 20%.
  3. Nov 2022 – now

    Freelance Web Developer

    Self-employed
    • Build responsive sites for three small-business clients, with search metadata and contact forms, deployed through Git and Netlify with Cloudflare DNS.
  4. Jun 2021 – Jul 2026

    Audio Supervisor

    Ministry Voice of Salvation · project page
    • Ran audio for 16+ live events and coached a 10-person crew; setup time dropped 25%.
    • Set up Dante audio-over-IP across 48 channels and built an Excel VBA inventory tracker for 300+ items.
  5. Nov 2022 – Jan 2026

    E-Commerce Associate

    Endure Forever · project page
    • Rebuilt the Shopify storefront front end. Average page load went from 4.2 s to 1.9 s, and online revenue rose 12% over six months.
  6. May – Aug 2025

    Command & Data Handling, NASA L’SPACE Mission Concept Academy

    Remote · project page
    • Designed the C&DH subsystem for a Mars rover mission concept with one other teammate, through Preliminary Design Review.
Skills

Tools I use

Test & measurement
Oscilloscope, signal generator, digital multimeter, through-hole and SMT soldering, breadboard prototyping
Simulation & EDA
Altium Designer, KiCad, LTspice, Cadence, Ansys HFSS, Ansys Sherlock
Embedded & RF
Arduino, XBee Pro, GNSS/NMEA, UART, SPI, I²C, MOSFET switching
Programming
C/C++, Python (NumPy, Pandas), SQL, Linux, Git
Mechanical CAD
SOLIDWORKS, Siemens NX, Fusion 360, AutoCAD, 3D printing
Photo & web
Lightroom, Photoshop, Premiere Pro; HTML, CSS, JavaScript, Netlify, Cloudflare